|
|
(Your shopping cart is empty)
|
|
 |
|
|
Are you looking for a simple solution to block noise entering through your windows?
Use our 2" thick SoundAway Mat to create a Window Plug.
What is a Window Plug? Well, think of it as a sound sponge designed to block, reflect, and absorb sound. Our Window Plug is made from a moisture-resistant, flame retardant, 2" thick, black, closed-cell foam. Simply measure your window, cut our SoundAway Mat approximately 1" greater than the width, 1" greater than the length, and squeeze it into the window frame. An air-tight fit will offer the greatest relief from traffic noise, noisy neighbors, and many other unwanted sound.
What size do I purchase?Measure the width and length of your window opening from the inside of your room. If you need help in determining how many feet of 2" SoundAway Mat you'll need then provide us the dimensions and get a Quick Quote. We'll take your window measurements and tell you how many feet of Mat you need.
To determine how many feet of SoundAway Mat you'll need start by using the smaller of your window's dimensions as the width. If your width is less than 48" then round up the length to the nearest foot, new length. In the shopping cart enter the new length in the Quantity field. We will cut your Window Plug to the new length you specify. The maximum length is limited by the length of the roll that is 18' long. Refer to the illustration below.
For information on soundproofing doors, take a look at an easy-to-install, highly effective, removable noise barrier: SoundAway Acoustical Door Cover
Application: Window Plug
Solution: 2" SoundAway Mat
Sold by Lineal Foot: 4' Wide (specify the length in the Quantity field in the shopping cart)
Take a look at our step-by-step installation instructions with accompanying photos:
Step 1:
- Measure your window; interior frame dimensions
- Use the smaller of the two as your width
- Add 1" to the width
- Add 1" to the length
Step 2:
- Cut to size
- Use a sharp blade like Insul-Knife
- An electric (turkey-carving) knife, shown in the photo, works well
- You can also use a box-cutter utility knife
Step 3:
- Insert Window Plug inside window frame
- Leave an air gap between the Mat and the glass
Step 4:
- Squeeze to create an air-tight seal
- Remove your Window Plug to open your window or let light in your room
- Store it flat to have it ready for use
Do you need help?
Call us at 760-599-3985 to discuss your sound or noise project.
|
|
|
Experience an immediate and significant noise reduction using your Window Plug.
|
|
|
|
|
